×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
low consistency elastomers advancedengineering optoelectronics/electronics

CF19-2186

MEDIUM CURE RATE, GENERAL PURPOSE SILICONE ELASTOMER

 

Description

  • A two-part silicone system
  • Provided in mix and dispense applicators
  • 1:1 Mix Ratio (Part A:B)

Applications

  • For applications requiring a rapid cure and easy application
  • Useful for potting, encapsulating and replicating surfaces and devices
  • Ideal for providing protection of electronic components and assemblies against shock, vibration, moisture, ozone, dust and other contaminants
  • Ideal for molding or use in O-rings, potting connectors, cable harness breakouts, molded high voltage terminals, seals, and gaskets

Product Details

Property Average result
Durometer 25 Type A
Viscosity 75,000 cP
Work Time 15 minutes
Tensile 1,100 psi
Appearance Translucent
Cure 30 minutes / 150 C
Cure System Platinum
Elongation 600 %
Mix Ratio 1:1
Refractive Index 1.4
Specific Gravity 1.11
Tear 80 ppi
Comment Dielectric properties are excellent for actuators and other applications where dielectric properties are critical
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.