×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
adhesives/sealants advancedengineering space

CV-2287

CONTROLLED VOLATILITY SILICONE ELASTOMER

 

Description

  • Two-part, translucent, pourable silicone system
  • Offers a high tear strength, good physical properties and a broad operating temperature range
  • 10:1 Mix Ratio (Part A:Part B)

Applications

  • For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
  • To provide protection of electric components and assemblies against shock, vibration, moisture, dust, chemicals and other environmental hazards
  • Ideal for use in potting connectors, cable harness breakouts, molded high-voltage terminals, seals and gaskets due to its high tear strength
  • For applications requiring a broader operating temperature range

Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%


Product Details

Property Average result
Cure System Platinum
Viscosity 85,000 cP
Lap Shear 450 psi
Durometer 30 Type A
Appearance Translucent
Cte 535 ppm/C
Cure 30 minutes / 150 C
Dielectric Strength 900 volts/mil
Elongation 400 %
Mix Ratio 10:1
Specific Gravity 1.11
Tear 60 ppi
Tensile 750 psi
Work Time 3.5 hours
Comment Low / High Temperature, Flowable, Fast Cure
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.