Thank you
×
Your document can be opened using the below link
Download Full Article
electrically conductive/static dissipative
advancedengineering
space
Description
- Two-part, black electrically conductive RTV silicone
- 10:1 Mix Ratio (Part A:B)
Applications
- For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
- Use for RFI and EMI shielding in electronic and space applications
- Use to adhere covers onto housings or for any application where grooves and other configurations require a flowable to limited flow material
- For applications requiring a broader operating temperature range
Meets or exceeds the ASTM E 595 low outgas specifications outlined
in NASA SP-R-0022A and European Space Agency PSS-014-702, with
a TML of ≤1% and CVCM of ≤0.1%
| Property |
Average result |
| Tensile |
475 psi
|
| Durometer |
75 Type A
|
| Cure System |
Platinum |
| Volume Resistivity |
2.5 ohmcm
|
| Appearance |
Black |
| Cte |
580 ppm/C
|
| Cure |
30 minutes / 150 C |
| Elongation |
90 %
|
| Lap Shear |
250 psi
|
| Mix Ratio |
10:1 |
| Specific Gravity |
1.19 |
| Work Time |
2 hours
|
| Comment |
2.5 ohmcm, *4) Primed Lap Shear 250 psi (1.7 MPa), Carbon Fiber Filled |
| Property |
Average result |
| Tensile |
3.28 MPa
|
| Durometer |
75 Type A
|
| Cure System |
Platinum |
| Volume Resistivity |
2.5 ohmcm
|
| Appearance |
Black |
| Cte |
580 ppm/C
|
| Cure |
30 minutes / 150 C |
| Elongation |
90 %
|
| Lap Shear |
1.72 MPa
|
| Mix Ratio |
10:1 |
| Specific Gravity |
1.19 |
| Work Time |
2 hours
|
| Comment |
2.5 ohmcm, *4) Primed Lap Shear 250 psi (1.7 MPa), Carbon Fiber Filled |
Display in metric units
The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
What Is Space Grade?
Discover what it takes to make silicones worthy of the distinction "Space Grade" and the rigorous testing that these materials undergo.
Read More