Your document can be opened using the below link


Thank you, please click link below to continue

thermally conductive advancedengineering space




*22) 1.5 W/mK *,4 ) Primed Lap Shear 160 psi (1.1 MPa)


  • Two-part, white, thermally conductive silicone
  • Cures with the addition of heat
  • 15:1 Mix Ratio (Part A:B)


  • For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
  • To provide heat transfer between electrical/electronic components and their heat sinks
  • Use to adhere integrated circuit substrates, base plates, heat sinks or where grooves or other configurations require a non-flowable to limited flow material

Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%

Product Details

Property Average result
Thermal Conductivity 1.49 W/(mK)
Viscosity 3,560,000 cP
Cure System Platinum
Tensile 200 psi
Appearance White
Cure 7 days / RTV
Dielectric Strength 540 volts/mil
Durometer 75 Type A
Elongation 30 %
Lap Shear 160 psi
Mix Ratio 15:1
Specific Gravity 1.53
Tack Free Time 4.5 hours
Tear 50 ppi
Volume Resistivity 530,000,000,000,000 ohmcm
Work Time 2 hours
Comment *22) 1.5 W/mK *,4 ) Primed Lap Shear 160 psi (1.1 MPa)
Display in metric units

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

What Is Space Grade?

Discover what it takes to make silicones worthy of the distinction "Space Grade" and the rigorous testing that these materials undergo.

Read More