×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
thermally conductive advancedengineering space

CV-2960

THERMALLY CONDUCTIVE, CONTROLLED VOLATILITY SILICONE

 

Description

  • Two-part, white, flowable, thermally conductive silicone
  • Cures with the addition of heat
  • 10:1 Mix Ratio (Part A:Part B)

Applications

  • For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
  • To provide moderate heat transfer between electrical/electronic components and their heat sinks
  • Use for adhering openings in modules and housing where grooves or other configurations require a limited flow material

Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%


Product Details

Property Average result
Thermal Conductivity 0.83 W/(mK)
Viscosity 130,000 cP
Cure System Platinum
Tensile 200 psi
Appearance White
Cte 275 ppm/C
Cure 7 days / RTV
Durometer 60 Type A
Elongation 110 %
Lap Shear 205 psi
Mix Ratio 10:1
Specific Gravity 1.34
Tack Free Time 3 hours
Tear 45 ppi
Work Time 1.5 hours
Comment *22) 0.8 W/mK, *4) Primed Lap Shear 205 psi (1.4 MPa), Low Viscosity
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.