Your document can be opened using the below link


Thank you, please click link below to continue

adhesives/sealants advancedengineering space





  • Two-part, translucent silicone system
  • Incorporates an adhesion promoter
  • Low viscosity
  • Convenient 1:1 mix ratio (Part A:B)


  • For applications requiring low outgassing and minimal volatile condensables under extreme operating conditions
  • As an embedding or potting compound for electronic assemblies and components to provide protection from extremes in humidity, radiation, thermal stress and mechanical stress
  • Use to adhere covers onto housings or for any application where grooves and other configurations require a material with superior flow

Meets or exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤1% and CVCM of ≤0.1%

Product Details

Property Average result
Cure System Platinum
Viscosity 2,600 cP
Lap Shear 50 psi
Durometer 30 Type A
Appearance Transparent
Cure 1 hours / 65 C
Elongation 150 %
Mix Ratio 1:1
Specific Gravity 1.01
Tensile 425 psi
Comment Primerless Adhesion
Display in metric units

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.