Thank you
×
Your document can be opened using the below link
Download Full Article
adhesives/sealants
advancedengineering
electronics/optoelectronics
Description
- Two-part, tan-colored, electrically conductive silicone
- 20:1 Mix Ratio (Part A: Part B)
Applications
- For applications requiring low volatility
- Well suited for form-in-place conductive gaskets
- Use as a thermally or electrically conductive interface material
Property |
Average result |
Cure System |
Platinum |
Viscosity |
186,200 cP
|
Durometer |
85 Type A
|
Appearance |
Tan |
Cte |
140 ppm/C
|
Cure |
30 minutes / 150 C |
Elongation |
70 %
|
Ionic Content Cl |
<5 ppm
|
Ionic Content K |
<7 ppm
|
Ionic Content Na |
<5 ppm
|
Mix Ratio |
20:1 |
Specific Gravity |
3.39 |
Tensile |
525 psi
|
Thermal Conductivity |
1.2 W/(mK)
|
Volume Resistivity |
0.01 ohmcm
|
Work Time |
2.75 hours
|
Property |
Average result |
Cure System |
Platinum |
Viscosity |
186,200 MPa*s
|
Durometer |
85 Type A
|
Appearance |
Tan |
Cte |
140 ppm/C
|
Cure |
30 minutes / 150 C |
Elongation |
70 %
|
Ionic Content Cl |
<5 ppm
|
Ionic Content K |
<7 ppm
|
Ionic Content Na |
<5 ppm
|
Mix Ratio |
20:1 |
Specific Gravity |
3.39 |
Tensile |
3.62 MPa
|
Thermal Conductivity |
1.2 W/(mK)
|
Volume Resistivity |
0.01 ohmcm
|
Work Time |
2.75 hours
|
Display in metric units
The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
Specialty Silicones for Displays
The NuSil™ line of optoelectronic silicones enable device manufacturers from smart phones to stadium screens and everything in between to create next-generation displays that are sharper, brighter and more rugged.
Read More