×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
liquid silicone rubbers advancedengineering commercialaviation/defense/electronics/optoelectronics

FS-3511

LIQUID INJECTION MOLDING FLUOROSILICONE ELASTOMER

 

Description

  • Two-part, translucent, fluorosilicone elastomer used with liquid injection molding equipment
  • 1:1 Mix Ratio (Part A: Part B)
  • Cures rapidly with heat
  • 100 mol % fluorosilicone

Applications

  • For components exposed to JP-8, aviation fuels and solvents
  • For applications requiring a medium hardness silicone with solvent resistance
  • Some typical applications include O-rings, gaskets, seals, and precision molded parts
  • Excellent for molding high quality parts at rapid rates

Product Details

Property Average result
Tear 60 ppi
Elongation 335 %
Tensile 1,150 psi
Durometer 40 Type A
Appearance Translucent
Cure 30 minutes / 150 C
Cure System Platinum
Extrusion Rate 35 g/minute
Mix Ratio 1:1
Specific Gravity 1.39
Work Time >24 hours
Comment LSR Fluoro Elastomer;For long term fuel or solvent exposure. Can be liquid injection molded and requires heat to cure. Recommend SP-120 or SP-201
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.