×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
high consistency rubbers advancedengineering electronics/commercialaviation/defense/optoelectronics

FS-3781

FLUOROSILICONE HIGH CONSISTENCY ELASTOMER

 

Description

  • Pre-catalyzed, high consistency elastomer (HCR)
  • Strained through a 400-mesh screen (minimum) to ensure freedom from particulate contamination

Applications

  • Applications requiring solvent resistance
  • Transfer and compression molding parts such as: o-rings, gaskets, stoppers and seals
  • Calendering and extruding

Product Details

Property Average result
Durometer 30 Type A
Tensile 850 psi
Elongation 300 %
Tear 40 ppi
Appearance Translucent
Cure 30 minutes / 120 C
Cure System Peroxide
Plasticity 110 mils
Post Cure 1 hour / 150 C
Specific Gravity 1.33
Comment HCR Fluoro Elastomer;Recommend for long term fuel and solvent exposure. Can be compression molded and requires heat to cure. High tear.
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.