×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
low consistency elastomers advancedengineering electronics/optoelectronics

LS1-6140

OPTICALLY CLEAR SILICONE ELASTOMER

 

Description

  • Two-part, optically clear silicone system
  • Based on a methyl silicone polymer
  • Low viscosity
  • 1:1 Mix Ratio (Part A:B)
  • Requires heat to cure

Applications

  • For bonding, casting or compression molding of high performance optical components
  • For applications requiring index matching at 1.40
  • For photonics applications requiring low volatility silicone to avoid contamination

Product Details

Property Average result
Tensile 900 psi
Viscosity 3,200 cP
Durometer 50 Type A
Appearance Transparent
Cte 330 ppm/C
Cure 60 minutes / 150 C
Cure System Platinum
Dielectric Strength 530 volts/mil
Elongation 90 %
Ionic Content Cl <5 ppm
Ionic Content K <2.5 ppm
Ionic Content Na <2.5 ppm
Lap Shear 270 psi
Mix Ratio 1:1
Refractive Index 1.4
Specific Gravity 1.02
Comment Low volatility and requires heat to cure, long pot life for dispensing
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.