Thank you
×
Your document can be opened using the below link
Download Full Article
adhesives
lifesciences
generalhealthcare
Description
- One part, solvent-free silicone
- Cures at room temperature upon exposure to atmospheric moisture
Applications
- Well suited for use as an adhesive for bonding and sealing silicone materials
- For applications requiring the bonding of silicone to metals, urethanes and various other substrates
NuSil Technology’s MED-1000 shall not be considered for use in human implantation for a period of greater than 29 days.
| Property |
Average result |
| Cure System |
Acetoxy |
| Tack Free Time |
12 minutes
|
| Durometer |
25 Type A
|
| Mix Ratio |
1 PART |
| Appearance |
Translucent |
| Cure |
72 hours / RTV |
| Elongation |
795 %
|
| Extrusion Rate |
2.5 g/minute |
| Specific Gravity |
1.08 |
| Stress @ Strain |
110 psi / 200 % |
| Tear |
75 ppi
|
| Tensile |
1,400 psi
|
| Comment |
Self-Leveling |
| Property |
Average result |
| Cure System |
Acetoxy |
| Tack Free Time |
12 minutes
|
| Durometer |
25 Type A
|
| Mix Ratio |
1 PART |
| Appearance |
Translucent |
| Cure |
72 hours / RTV |
| Elongation |
795 %
|
| Extrusion Rate |
2.5 g/minute |
| Specific Gravity |
1.08 |
| Stress @ Strain |
0.76 MPa / 200 % |
| Tear |
13.23 kN/m
|
| Tensile |
9.66 MPa
|
| Comment |
Self-Leveling |
Display in metric units
The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
NUSIL QUALITY SYSTEM (NQS™)
Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.