Thank you
×
Your document can be opened using the below link
Download Full Article
primers
lifesciences
generalhealthcare/medicalimplant
Description
- Specially formulated primer
- One-component primer supplied in VM&P Naphtha requires no mixing
- Easy to use, air-drying, one-part primer designed for use with one and two-part RTV systems where conventional silicone primers are insufficient
- Flash Point (TCC) of 17°C (63°F)
- Convenient container sizes yield less waste
Applications
- Improves adhesion of silicones to various substrates including: metals (such as stainless steel, steel, copper and aluminum), ceramics, rigid plastics, and other silicone materials
NuSil Technology’s MED-160 may be considered for use in human implantation for a period of greater than 29 days.
| Property |
Average result |
| Specific Gravity |
0.77 |
| Non-Volatile Content |
4 %
|
| Mix Ratio |
1 PART |
| Cure |
1 hours / RTV |
| Appearance |
Translucent |
| Lap Shear |
330 psi
|
| Comment |
General Purpose Primer |
| Property |
Average result |
| Specific Gravity |
0.77 |
| Non-Volatile Content |
4 %
|
| Mix Ratio |
1 PART |
| Cure |
1 hours / RTV |
| Appearance |
Translucent |
| Lap Shear |
2.28 MPa
|
| Comment |
General Purpose Primer |
Display in metric units
The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
NUSIL QUALITY SYSTEM (NQS™)
Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.