×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
low consistency elastomers lifesciences generalhealthcare

Premium Care

MED-4011

LOW CONSISTENCY SILICONE ELASTOMER

 

Description

  • Two-part, translucent gray, pourable silicone system
  • Cures with heat via addition-cure chemistry
  • 10:1 Mix Ratio (Part A: Part B)

Applications

  • For use in potting, encapsulating, coating, and injection or transfer molding applications
  • As an adhesive, encapsulating compound or mold making material.

Product Details

Property Average result
Tensile 670 psi
Viscosity 97,400 cP
Durometer 27 Type A
Appearance Translucent
Cure 3 minutes / 150 C
Cure System Platinum
Elongation 530 %
Mix Ratio 10:1
Post Cure 1 hour / 150 C
Specific Gravity 1.09
Comment Flowable
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.