×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
high consistency rubbers lifesciences generalhealthcare

Premium Care

MED-4052

HIGH CONSISTENCY SILICONE ELASTOMERS

 

Description

  • A unique three-part system, VersaSil3 offers the flexibility of adjustable cure rate and table life for various fabrication requirements
  • High tear strength, wide processing parameters, and translucent, non-tacky surfaces
  • Developed to be compounded with the inhibitor CAT-40 and the platinum catalyst CAT-55. Advantages include: no volatile by-products, lower cure temperature, and optional post-cure
  • 100: 1.0: 1.0 Mix Ratio

Applications

  • For mass production with maximum flexibility
  • For a wide variety of fabrication techniques for the healthcare industry including: molding, calendering and extruding

NuSil Technology’s VersaSil3 Series shall not be considered for use in human implantation for a period of greater than 29 days.


Product Details

Property Average result
Durometer 50 Type A
Tensile 1,445 psi
Elongation 1,100 %
Tear 230 ppi
Cure 10 minutes / 116 C
Cure Rate Scorch 0.7 minutes
Cure Rate T90 2.25 minutes
Mix Ratio 100:1:1
Special Feature VersaSil
Specific Gravity 1.16
Stress @ Strain 280 psi / 200 %
Work Time 9 hours
Comment Can be Cured via Platinum or Peroxide
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.