×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
high consistency rubbers lifesciences generalhealthcare

Premium Care

MED-4174

SILICONE ELASTOMER

 

Description

  • An uncatalyzed high consistency material
  • Catalyze with various peroxides to form a medium durometer rubber
  • Strained through fine mesh stainless steel screens to ensure freedom from particulate contamination

Applications

  • For fabricating molded and extruded silicone rubber parts

NuSil Technology’s MED-4174 shall not be considered for use in human implantation for a period of greater than 29 days.


Product Details

Property Average result
Tear 225 ppi
Elongation 775 %
Tensile 1,200 psi
Durometer 50 Type A
Appearance Translucent
Cure 5 minutes / 116 C
Cure Rate Scorch 0.55 minutes
Cure Rate T90 1.7 minutes
Cure System Peroxide
Mix Ratio 1 PART
Plasticity 105 mils
Post Cure 4 hours / 205 C
Specific Gravity 1.15
Stress @ Strain 325 psi / 200 %
Comment Uncatalyzed
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.