Your document can be opened using the below link


Thank you, please click link below to continue

liquid silicone rubbers lifesciences medicalimplant






  • Two-part, white silicone system designed for use with injection molding equipment
  • Cures with heat via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)
  • High tear strength
  • Designed to resist blocking and rehealing that otherwise might be induced by the radiation sterilization of molded parts.


  • For the injection molding of parts requiring a material with a medium durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
  • Suitable for over-molding applications
  • Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones

Product Details

Property Average result
Tear 250 ppi
Elongation 400 %
Tensile 1,070 psi
Durometer 44 Type A
Appearance White
Attribute NuSil Technology’s MED-4842 may be considered for use in human implantation for a period of greater than 29 days.
Cure 10 minutes / 150 C
Cure System Platinum
Extrusion Rate 215 g/minute
Mix Ratio 1:1
Special Feature Specialty Liquid Silicone Rubbers
Specific Gravity 1.17
Stress @ Strain 540 psi / 200 %
Work Time >72 hours
Comment Injection Molding Elastomer, Resists Blocking
Display in metric units

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.