Thank you
×
Your document can be opened using the below link
Download Full Article
liquid silicone rubbers
lifesciences
medicalimplant
Injection Molding Elastomer
Description
- Two-part, translucent silicone system designed for use with injection molding equipment
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
Applications
- For the injection molding of parts requiring a material with a high durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
- Suitable for over-molding applications
- Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones
NuSil Technology’s MED-4880 may be considered for use in human implantation for a period of greater than 29 days.
| Property |
Average result |
| Durometer |
80 Type A
|
| Tensile |
1,030 psi
|
| Elongation |
265 %
|
| Tear |
90 ppi
|
| Appearance |
Translucent |
| Cure |
5 minutes / 165 °C |
| Cure System |
Platinum |
| Extrusion Rate |
110 g/minute |
| Mix Ratio |
1:1 |
| Specific Gravity |
1.16 |
| Stress @ Strain |
650 psi / 100 % |
| Work Time |
70 hours
|
| Comment |
Injection Molding Elastomer |
| Property |
Average result |
| Durometer |
80 Type A
|
| Tensile |
7.1 MPa
|
| Elongation |
265 %
|
| Tear |
15.87 kN/m
|
| Appearance |
Translucent |
| Cure |
5 minutes / 165 °C |
| Cure System |
Platinum |
| Extrusion Rate |
110 g/minute |
| Mix Ratio |
1:1 |
| Specific Gravity |
1.16 |
| Stress @ Strain |
4.48 MPa / 100 % |
| Work Time |
70 hours
|
| Comment |
Injection Molding Elastomer |
Display in metric units
The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
What is Medical Grade?
Discover how Medical-grade silicones are specifically designed, manufactured and purified to meet the strictest needs of the healthcare industry.
Read More