×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
liquid silicone rubbers lifesciences generalhealthcare

Premium Care

MED-4960

LIQUID SILICONE RUBBER

 

Description

  • Two-part, translucent silicone system used with injection molding equipment
  • Cures with heat via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • For the injection molding of parts requiring a material with a high durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
  • Suitable for over-molding applications
  • Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones

NuSil Technology’s MED-4960 shall not be considered for use in human implantation for a period of greater than 29 days.


Product Details

Property Average result
Tear 250 ppi
Elongation 525 %
Tensile 1,300 psi
Durometer 60 Type A
Appearance Translucent
Cure 5 minutes / 165 °C
Cure Rate Scorch 1.05 minutes
Cure Rate T90 2.1 minutes
Cure System Platinum
Extrusion Rate 80 g/minute
Mix Ratio 1:1
Specific Gravity 1.15
Stress @ Strain 600 psi / 200 %
Work Time >24 hours
Comment Injection Molding Elastomer
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.