Thank you
×
Your document can be opened using the below link
Download Full Article
low consistency elastomers
lifesciences
generalhealthcare
Description
- Two-part, optically clear, solvent free, low viscosity silicone elastomer
- Cures with heat via addition-cure chemistry
- 10:1 Mix Ratio (Part A: Part B)
Applications
- For use in potting, encapsulating, coating, and injection or transfer molding applications
| Property |
Average result |
| Tensile |
1,200 psi
|
| Work Time |
5.5 hours
|
| Viscosity |
3,800 cP
|
| Durometer |
50 Type A
|
| Appearance |
Transparent |
| Cure |
15 minutes / 150 C |
| Cure System |
Platinum |
| Elongation |
100 %
|
| Mix Ratio |
10:1 |
| Specific Gravity |
1.03 |
| Comment |
1.41 R.I., Optically Clear, Low Viscosity |
| Property |
Average result |
| Tensile |
8.28 MPa
|
| Work Time |
5.5 hours
|
| Viscosity |
3,800 MPa*s
|
| Durometer |
50 Type A
|
| Appearance |
Transparent |
| Cure |
15 minutes / 150 C |
| Cure System |
Platinum |
| Elongation |
100 %
|
| Mix Ratio |
10:1 |
| Specific Gravity |
1.03 |
| Comment |
1.41 R.I., Optically Clear, Low Viscosity |
Display in metric units
The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
The Strongest Silicone Elastomer Ever Developed
Dr. Jim Lambert, NuSil™ Director of Research and Development, Biomaterials, introduces our breakthrough material that has a tensile strength of up to 50% greater than existing silicone elastomers on the market.
Read More