×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
dispersions lifesciences medicalimplant

Implant

MED-6400

ADDITION CURE SILICONE DISPERSION

 

Description

  • Two-part, low viscosity, heat curable silicone dispersion
  • Cures via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • Suitable for dip casting and heat-curing of thin elastomeric films
  • Low viscosity makes dispersions ideal for use as sprayable coatings

NuSil Technology’s MED-6400 may be considered for use in human implantation for a period of greater than 29 days.


Product Details

Property Average result
Cure System Platinum
Viscosity 860 cP
Non-Volatile Content 35 %
Durometer 30 Type A
Appearance Translucent
Cure 30 minutes / 25 C 45 minutes / 75 C 135 minutes / 150 C
Elongation 850 %
Mix Ratio 1:1
Refractive Index 1.43
Specific Gravity 1.08
Stress @ Strain 350 psi / 300 %
Tear 160 ppi
Tensile 1,600 psi
Work Time 24 hours
Comment 1.43 R.I. in Xylene
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.