Thank you
×
Your document can be opened using the below link
Download Full Article
dispersions
lifesciences
medicalimplant
Description
- Two-part, heat curable silicone dispersion
- Cures via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
Applications
- Suitable for dip casting and heat-curing of thin elastomeric films
- Low viscosity makes dispersions ideal for use as sprayable coatings
NuSil Technology’s MED-6600 may be considered for use in human implantation for a period of greater than 29 days.
| Property |
Average result |
| Durometer |
25 Type A
|
| Non-Volatile Content |
35 %
|
| Viscosity |
350 cP
|
| Cure System |
Platinum |
| Appearance |
Translucent |
| Cure |
30 minutes / 25 C
45 minutes / 75 C
135 minutes / 150 C |
| Elongation |
800 %
|
| Mix Ratio |
1:1 |
| Refractive Index |
1.46 |
| Specific Gravity |
1.1 |
| Stress @ Strain |
300 psi / 300 % |
| Tear |
160 ppi
|
| Tensile |
1,200 psi
|
| Work Time |
24 hours
|
| Comment |
1.46 R.I. in Xylene |
| Property |
Average result |
| Durometer |
25 Type A
|
| Non-Volatile Content |
35 %
|
| Viscosity |
350 MPa*s
|
| Cure System |
Platinum |
| Appearance |
Translucent |
| Cure |
30 minutes / 25 C
45 minutes / 75 C
135 minutes / 150 C |
| Elongation |
800 %
|
| Mix Ratio |
1:1 |
| Refractive Index |
1.46 |
| Specific Gravity |
1.1 |
| Stress @ Strain |
2.07 MPa / 300 % |
| Tear |
28.22 kN/m
|
| Tensile |
8.28 MPa
|
| Work Time |
24 hours
|
| Comment |
1.46 R.I. in Xylene |
Display in metric units
The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
NUSIL QUALITY SYSTEM (NQS™)
Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.