×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
adhesives lifesciences medicalimplant

Implant

MED2-4213

Fast-Cure Silicone Adhesive

 

Description

  • Two-part, translucent, thixotropic, high tear strength silicone systems
  • MED1-4213 and MED3-4213 cure at room temperature and all three cure rapidly with the application of heat in an oven, or by a heat gun or lamp
  • Many bonding applications do not require the use of a silicone primer for suitable adhesion
  • Do not require atmospheric moisture to cure
  • No curing byproducts such as acetic acid or methyl alcohol
  • Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
  • MED1-4213 has a work time of ~15 minutes, MED2-4213 has a minimum work time of 15 hours, and MED3-4213 has a minimum work time of 60 minutes
  • MED1-4213 & MED3-4213 cure in less than 24 hours at room temperature

Applications

  • MED1-4213 has a work time of ~15 minutes, MED2-4213 has a minimum work time of 15 hours, and MED3-4213 has a minimum work time of 60 minutes
  • MED1-4213 & MED3-4213 cure in less than 24 hours at room temperature

Product Details

Property Average result
Cure System Platinum
Work Time 15 hours
Durometer 15 Type A
Mix Ratio 1:1
Appearance Translucent
Cure 15 minutes / 150 C
Elongation 800 %
Specific Gravity 1.12
Stress @ Strain 30 psi / 100 %
Tear 130 ppi
Tensile 1,000 psi
Viscosity 147,700 cP
Comment HTV, Fast Cure, High Extrusion Rate, Thixotropic
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.