×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
low consistency elastomers lifesciences generalhealthcare

Premium Care

MED2-4220

FAST CURE LOW CONSISTENCY SILICONE ELASTOMER

 

Description

  • A two-part, translucent silicone elastomer system that cures at room temperature
  • Cures with heat via addition-cure chemistry
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • For use in potting, encapsulating, coating, and injection or transfer molding applications
  • For applications requiring very rapid cure elastomer

Product Details

Property Average result
Durometer 20 Type A
Viscosity 19,500 cP
Work Time 3 minutes
Tensile 585 psi
Appearance Translucent
Cure 15 minutes / 150 C
Cure System Platinum
Elongation 500 %
Mix Ratio 1:1
Specific Gravity 1.07
Stress @ Strain 100 psi / 200 %
Comment Low Viscosity, Rapid RTV Cure
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.