×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
adhesives lifesciences generalhealthcare

Premium Care

MED3-4013

FAST-CURE SILICONE ADHESIVE

 

Description

  • Two-part, translucent, thixotropic, high tear strength silicone systems
  • MED1-4013 and MED3-4013 cure at room temperature and all three cure rapidly with the application of heat in an oven, or by a heat gun or lamp
  • Many bonding applications do not require the use of a silicone primer for suitable adhesion
  • Do not require atmospheric moisture to cure
  • No curing byproducts such as acetic acid or methyl alcohol
  • Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
  • MED1-4013 has a work time of ~15 minutes, MED2-4013 has a minimum work time of 15 hours, and MED3-4013 has a minimum work time of 60 minutes
  • MED1-4013 & MED3-4013 cure in less than 24 hours at room temperature

Applications

  • Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
  • MED1-4013 has a work time of ~15 minutes, MED2-4013 has a minimum work time of 15 hours, and MED3-4013 has a minimum work time of 60 minutes
  • MED1-4013 & MED3-4013 cure in less than 24 hours at room temperature

NuSil Technology LLC’s MED1-4013, MED2-4013, & MED3-4013 are restricted products. They shall not be considered for use in human implantation for a period of greater than 29 days.


Product Details

Property Average result
Mix Ratio 1:1
Durometer 20 Type A
Tack Free Time 2 hours
Cure System Platinum
Appearance Translucent
Cure 24 hours / RTV
Elongation 800 %
Peel Strength 23 lbf/in
Specific Gravity 1.12
Stress @ Strain 125 psi / 200 %
Tear 130 ppi
Tensile 1,000 psi
Viscosity 129,000 cP
Comment Thixotropic, RTV, Fast Cure
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

HCR
The Strongest Silicone Elastomer Ever Developed

Dr. Jim Lambert, NuSil™ Director of Research and Development, Life Sciences, introduces our breakthrough material that has a tensile strength of up to 50% greater than existing silicone elastomers on the market.

Read More