×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
low viscosity elastomers lifesciences generalhealthcare

Premium care

MED3-4220

FAST CURE LOW CONSISTENCY SILICONE ELASTOMER

 

Description

  • A two-part, translucent silicone elastomer system
  • Cures at room temperature. Cure rate may be accelerated with heat.
  • Platinum addition cure
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • For use in potting, encapsulating, coating, and injection or transfer molding applications

NuSil Technology’s MED3-4220 shall not be considered for use in human implantation for a period of greater than 29 days.


Product Details

Property Average result
Durometer 25 Type A
Viscosity 74,500 cP
Work Time 15 minutes
Tensile 1,100 psi
Appearance Translucent
Cure 30 minutes / 150 °C
Cure System Platinum
Elongation 624 %
Mix Ratio 1:1
Specific Gravity 1.11
Tear 74 ppi
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

HCR
The Strongest Silicone Elastomer Ever Developed

Dr. Jim Lambert, NuSil™ Director of Research and Development, Biomaterials, introduces our breakthrough material that has a tensile strength of up to 50% greater than existing silicone elastomers on the market.

Read More