Thank you
×
Your document can be opened using the below link
Download Full Article
low consistency elastomers
lifesciences
generalhealthcare
Description
- A two-part, low viscosity, translucent silicone elastomer
- Cures with heat via addition-cure chemistry
- 1:1 Mix Ratio (Part A: Part B)
Applications
- For use in potting, encapsulating, coating, and injection or transfer molding applications
| Property |
Average result |
| Durometer |
17 Type A
|
| Viscosity |
20,500 cP
|
| Work Time |
27 minutes
|
| Tensile |
660 psi
|
| Appearance |
Translucent |
| Cure |
15 minutes / 150 °C |
| Cure System |
Platinum |
| Elongation |
580 %
|
| Mix Ratio |
1:1 |
| Tear |
35 ppi
|
| Comment |
Low Viscosity |
| Property |
Average result |
| Durometer |
17 Type A
|
| Viscosity |
20,500 MPa*s
|
| Work Time |
27 minutes
|
| Tensile |
4.55 MPa
|
| Appearance |
Translucent |
| Cure |
15 minutes / 150 °C |
| Cure System |
Platinum |
| Elongation |
580 %
|
| Mix Ratio |
1:1 |
| Tear |
6.17 kN/m
|
| Comment |
Low Viscosity |
Display in metric units
The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.
The Strongest Silicone Elastomer Ever Developed
Dr. Jim Lambert, NuSil™ Director of Research and Development, Biomaterials, introduces our breakthrough material that has a tensile strength of up to 50% greater than existing silicone elastomers on the market.
Read More