×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
adhesives/sealants advancedengineering commercialaviation/electronics/defense/optoelectronics

R-1140

CLEAR SILICONE ADHESIVE

 

Description

  • One-part, translucent, non-slumping silicone adhesive
  • Supplied ready to use in Semco® cartridges

Applications

  • Bonds aggressively to most surfaces including: glass, ceramics, most metals, natural and synthetic fibers, wood, painted surfaces, many plastics and other silicone rubbers
  • For applications requiring a operating temperature range of -65 to 240°C (-85 to 465°F)

Product Details

Property Average result
Durometer 30 Type A
Lap Shear 625 psi
Cure System Acetoxy
Appearance Translucent
Cure 72 hours / RTV
Elongation 350 %
Flow Rate 1.5 inches
Mix Ratio 1 PART
Non-Volatile Content 100 %
Specific Gravity 1.09
Tack Free Time 7 minutes
Tear 40 ppi
Tensile 700 psi
Comment Non-slump. General all purpose adhesive for a variety of substrates. 625 psi (4.3 MPa), primed (SP-120) lap shear.
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.