×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
coatings advancedengineering electronics/optoelectronics/commercialaviation/defense

R-2180

ICE PHOBIC COATING

 

Description

  • Two-part silicone elastomer dispersed in xylene
  • Two medium viscosity parts blend easily in a convenient 1:1 ratio (Part A:B)

Applications

  • For dip casting and heat-curing of thin elastomeric films
  • For use as a coating to minimize ice adhesion

Product Details

Property Average result
Appearance Transparent to translucent
Non-Volatile Content 20 %
Viscosity 3,075 cP
Cure 45 minutes / 75 C 135 minutes / 150 C
Cure System Platinum
Durometer 40 Type A
Elongation 1,050 %
Mix Ratio 1:1
Refractive Index 1.41
Stress @ Strain 150 psi / 100 %
Tear 300 ppi
Tensile 1,700 psi
Work Time >72 hours
Comment High strength coating and primer is recommended to increase adhesion. Requires heat to cure.
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.