×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
adhesives/sealants advancedengineering electronics/optoelectronics

R-2186

GENERAL PURPOSE SILICONE ELASTOMER

 

Description

  • Two-part, translucent, pourable silicone system
  • 10:1 Mix Ratio (Part A:B)
  • Cures at room temperature or rapidly with heat
  • High tear strength and good physical properties

Applications

  • To provide protection of electronic components and assemblies against shock, vibration, moisture, ozone, dust, chemicals and other environmental hazards
  • Ideal for molding or use in O-rings, potting connectors, cable harness breakouts, molded high voltage terminals, seals and gaskets due to its high physical strength
  • For applications requiring an operating temperature range of -65 to 240°C (-85 to 465°F)

Product Details

Property Average result
Cure System Platinum
Viscosity 83,000 cP
Lap Shear 475 psi
Durometer 30 Type A
Appearance Translucent
Cure 15 minutes / 150 C
Dielectric Strength 640 volts/mil
Elongation 450 %
Mix Ratio 10:1
Operating Temperature -65 C / 240 C
Specific Gravity 1.12
Tear 100 ppi
Tensile 1,050 psi
Work Time 2.5 hours
Comment Legacy general all purpose adhesive. 475 psi (3.3 MPa), primed (CF1-135) lap shear.
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

Optoelectronics
Specialty Silicones for Displays

The NuSil™ line of optoelectronic silicones enable device manufacturers from smart phones to stadium screens and everything in between to create next-generation displays that are sharper, brighter and more rugged.

Read More