×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
low consistency elastomers advancedengineering electronics/optoelectronics

R21-2615

OPTICALLY CLEAR, HIGH DUROMETER SILICONE ELASTOMER

 

Description

  • Flowable, two-part, optically clear, high durometer silicone
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • Use for potting and encapsulating electronic devices and for making molded parts
  • Useful in any application requiring a flowable, high durometer material

Product Details

Property Average result
Durometer 75 Type A
Viscosity 25,000 cP
Work Time 2 hours
Tensile 1,200 psi
Appearance Transparent
Cure 2 hours / 50 C
Cure System Platinum
Elongation 65 %
Mix Ratio 1:1
Specific Gravity 1.07
Tear 35 ppi
Comment Hard clear elastomer with 2 hr pot life and LTV cure
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.