×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
adhesives/sealants advancedengineering commercialaviation/defense

R3-2160

HIGH TEMPERATURE ADHESIVE/SEALANT SILICONE ELASTOMER

 

Description

  • Two-part, pourable silicone system
  • High tear strength and good physical properties
  • Designed for enhanced performance in extreme low and high temperatures
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • As a high temperature adhesive/sealant
  • Ideal for use in potting connectors, cable harness breakouts, molded high voltage terminals, seals and gaskets due to its high physical strength

Product Details

Property Average result
Cure System Platinum
Extrusion Rate 15 g/minute
Lap Shear 250 psi
Durometer 35 Type A
Appearance A: Red / B: Dark Brown
Cure 15 minutes / 150 C
Elongation 525 %
Mix Ratio 1:1
Post Cure 2 hours / 150 C
Specific Gravity 1.18
Tear 130 ppi
Tensile 550 psi
Work Time 72 hours
Comment Thermal Stability
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.