×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
adhesives/sealants advancedengineering electronics/optoelectronics

R31-2186

FAST-CURE SILICONE ADHESIVE

 

Description

  • Two-part, translucent, thixotropic, high tear strength silicone system
  • Cures at room temperature and rapidly with the application of heat in an oven, or by a heat gun or lamp
  • Many bonding applications do not require the use of a silicone primer for suitable adhesion
  • Does not require atmospheric moisture to cure
  • No curing byproducts such as acetic acid or methyl alcohol
  • Consistency allows product to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
  • 1:1 Mix Ratio (Part A:Part B)

Applications

  • Adhesive for bonding and sealing silicones to each other and other substrates such as metals and plastics
  • For rapid production or prototyping due to a rapid cure

Product Details

Property Average result
Cure System Platinum
Viscosity 142,500 cP
Extrusion Rate 15 g/minute
Lap Shear 110 psi
Durometer 20 Type A
Appearance Translucent
Cure 24 hours / RTV
Dielectric Strength 905 volts/mil
Elongation 775 %
Flow Rate 0.5 inches
Mix Ratio 1:1
Specific Gravity 1.12
Tear 125 ppi
Tensile 1,000 psi
Work Time 15 minutes
Comment RTV Primerless Adhesive;Very fast cure.
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.