×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
adhesives/sealants advancedengineering commercialaviation/defense/electronics

R33-2186-1

FAST-CURE WHITE SILICONE ADHESIVE

 

Description

  • Two-part, white, thixotropic, high tear strength silicone system
  • Cures at room temperature or rapidly with the application of heat in an oven, or by a heat gun or lamp
  • Primer is not required for many bonding applications
  • Does not require atmospheric moisture to cure
  • No curing byproducts such as acetic acid or methyl alcohol
  • Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • For bonding and sealing silicones to each other and other substrates such as metals and plastics
  • Suitable for fast-paced production or prototyping due to it’s rapid cure rate

Product Details

Property Average result
Durometer 20 Type A
Viscosity 80,000 cP
Appearance White
Elongation 740 %
Specific Gravity 1.12
Tear 135 ppi
Tensile 1,000 psi
Work Time 2 hours
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.