×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
adhesives/sealants advancedengineering commercialaviation/optoelectronics/defense/electronics

R33-2186

FAST-CURE SILICONE ADHESIVE

 

Description

  • Two-part, translucent, thixotropic, high tear strength silicone system
  • Cures at room temperature or rapidly with the application of heat in an oven, or by a heat gun or lamp
  • Many bonding applications do not require the use of a silicone primer for suitable adhesion
  • Does not require atmospheric moisture to cure
  • No curing byproducts such as acetic acid or methyl alcohol
  • Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • As adhesives for bonding and sealing silicones to each other and other substrates such as metals and plastics
  • For rapid production or prototyping due to a rapid cureor applications requiring an operating temperature range of –65°C to 240°C (-85 to 465°F)

Product Details

Property Average result
Cure System Platinum
Viscosity 124,350 cP
Durometer 20 Type A
Appearance Translucent
Cure 24 hours / RTV
Elongation 725 %
Mix Ratio 1:1
Operating Temperature -65 C / 240 C
Specific Gravity 1.12
Tear 150 ppi
Tensile 1,000 psi
Work Time 2 hours
Comment RTV Primerless Adhesive;Fast cure.
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.