×

Your document can be opened using the below link

×

Thank you, please click link below to continue

×
×
liquid silicone rubbers lifesciences generalhealthcare

Class VI

SIL-5930

CLASS VI SUPPORTED LIQUID SILICONE RUBBER

 

Description

  • Two-part, translucent silicone system designed for use with injection molding equipment
  • Rapid cure with no post-cure required
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • For the injection molding of parts requiring a material with a medium durometer including: molded rubber stoppers, gaskets, seals, valves, o-rings and other precision parts
  • Suitable for over-molding applications
  • Can be used with NuSil’s Healthcare color masterbatches for applications requiring colored silicones

  • egulatory Support
  • NuSil Technology’s Class VI (C6) products meet the requirements defined in ISO-10993 for Surface Devices with “limited” (<24 hours) or “prolonged” (1 to 30 days) contact duration NuSil Technology’s SIL-5930 shall not be considered for use in human implantation for a period of greater than 29 days.


Product Details

Property Average result
Durometer 30 Type A
Tensile 1,340 psi
Elongation 830 %
Tear 150 ppi
Appearance Translucent
Cure 5 minutes / 165 C
Cure Rate Scorch 0.15 minutes
Cure Rate T10 0.14 minutes
Cure Rate T90 0.3 minutes
Cure System Platinum
Extrusion Rate 145 g/minute
Mix Ratio 1:1
Specific Gravity 1.11
Stress @ Strain 160 psi / 200 %
Work Time >24 hours
Comment Designed for High Volume Injection Molding
Display in metric units
 

The above properties are tested on a lot-to-lot basis. Do not use as a basis for preparing specifications. Please contact NuSil Technology for assistance and recommendations in establishing particular specifications.

NUSIL QUALITY SYSTEM (NQS™)


Developed in direct response to our work in the most challenging environments, NQS is a systematic approach to achieving consistent quality that goes far beyond what you'd expect.